A Manual On The Different Types Of Jump Starters And How To Use Them

It is important for car owners to choose the most appropriate jump starter. There is a wide range of jump starters in the market. The main types of jump starters available in the markets are plug-in units and jump boxes. You can also learn about these quality RV tire pressure monitoring systems here.

The main benefit of purchasing a plug-in unit is the charging part of the process. Though jump boxes provide an instant charge, it is not good for your charging system including your alternator. Modern alternators are not designed to charge dead batteries, hence making your alternator to do this can reduce its effective life span.

Plug-in units provide a slow but steady current that is good for your electrical system. This will save you a coin you would have spent to replace or repair the very expensive alternator. However, plug-ins also have their downfall, that is, they have to be plugged in for them to work hence time wasting in a way. Plug-ins can be small and portable but they won’t just work if they are not plugged in.

Jump boxes, unlike plug-in units, do not have the ability to charge a dead battery. Nevertheless, they are portable and have the ability to provide the require amperage to start a car that has a dead battery. This makes the jump box the most suitable option for starting a car even when away from home. So long as you pick a unit with a large battery and always keep it fully charged, you can keep it in your trunk and travel anywhere without having to be psychologically tortured with the risk of your battery going dead.

One may consider getting both of these types of jump starters depending on the size of one’s pocket as they both have their positive and negative sides. If you are just able to purchase one, it is recommended you acquire the portable unit as it can be used in whatever place you are.

Having a jump starter in your possessing and knowing how to use it are two different things. To do this, connect your car plug to the jump starter at 12 volts. Then, connect the black clamp of the jump cable to your car battery at the negative pole of it and the red clamp to the positive pole of the battery. Enter your car and start the engine. After the car starts, remove the jump starter clamps from the car battery.

However, there is no perfect thing in the whole world wide. Jump starting a car may come with its dangers. For instance, a leaking dead battery may have explosive and highly flammable gas that may catch fire and have hazardous effects to both you and your car. You can also damage your car’s electrical system when you connect the jump starting clamps at the opposite poles to how they are supposed to be hooked. Finally, you have to ensure that the jumper cables are set or rooted in low risk location.

Leave a Reply

Your email address will not be published. Required fields are marked *